Premium exhaust fans provider in the United Kingdom: LevSupply has great expertise in designing and executing welding fume extraction systems for Robotic Welding or Automatic Welding operations. LevSupply’s wide range of products helps you find the most convenient solution. Deciding whether a portable is the best fit for your application depends on the application itself. One advantage of the portable is that it is source-capture and can travel between workstations. One downside of the portable is that (by the nature of it being portable) the amount of filter media we can fit in the unit is limited. You should ask yourself if the portability benefit is worth the reduction in filter life. Sometimes this is unavoidable, especially if you are welding on large pieces, in many different spots, etc. See more details at https://levsupply.co.uk/product-category/extraction-arms/.

Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.

Talking about the importance of soldering and welding is pointless if you already know about them. But, both of them have the drawback of emitting hazardous gases. Welding fumes contain considerable amounts of hydrogen fluoride gas, carbon monoxide, argon, and carbon dioxide. Also, the gases are known to contain manganese, beryllium, lead, aluminum, and arsenic. All of these can cause severe illnesses like cancer, kidney failure, and lead poisoning. So, is it wise to breathe in those poisonous fumes?

The machine uses a high-speed stream of electrons that is tightly focused using magnetic fields and applied to the materials to be joined. An energy beam welding machine has the ability to weld thick metals into thin metals. In addition, the welder can also join different types of metals. These types of welding machines can weld specific points on metals. There is little or no heat distortion in the welded areas. Since the welder must perform this welding in a vacuum as the electron beam will be absorbed by the air, this machine is not for home use.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

Although this is a regular drill press and not a magnetic drill press, you can also use this one for steel drilling. The motor has a rating of ½ HP and in order to change the drill speed for metal drilling, you have to change the belt and pulley combination setting to the slowest speed. As a drill press, the RIKON 30-120 does not have the best performance. The feeding wheel is not well made and is awkwardly situated. Your chances of getting the back of your fingers caught between the feeding wheel and the belt tensioner are quite high and it is very painful. The packaging of this drill press is poor as well. If you are looking for a tool that you can use for drilling steel exclusively, we recommend that you stick to magnetic drill presses. Regular drill presses can work great for wood, plastics, and steel, but they don’t have magnets and is impossible to use for vertical and overhead applications.

If you’re looking for a welder for home use, and you don’t necessarily need something you can take with you to local manufacturing jobs, then the Wolf MIG combination welder is a good place to start. Far from just another “simple” welder, the Wolf MIG comes with a changable wire speed and a range of fantastic features included, as well as the ability to switch easily between non-gas and gas-based welding. There are no tools required to switch to a non-gas weld, which is great if you’re in a hurry. Another positive feature of this home welder is the fact that it comes with all the additional accessories that you need to get started like a spool of flux cored wire and a wire brush. The 140 welder’s non-live torch is very simple and lightweight to use, with 6 different power settings to choose from. Additionally, the fully-variable wire speed control means that you can adjust your performance to suit the work you’re doing. If you’ve never worked with a DC or MIG car welder before, then you’re sure to be impressed with the performance of this high-quality welding machine. The inbuilt turbofan system also allows for high-quality extended welding cycles.

Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.

Out of a huge product range of the Dirty Pro Tools, we have found a top-grade MIG welder that turned out to be so good that we have decided to add it to this shortlist. It is the tool for welding metalware of medium thickness with the output range from 50? to 60?, best for sheets up to 2 mm thick. In addition, a pretty powerful converter of this welder allows working for about 6 minutes at 50?. So, you’ll be able to weld thin pieces for a good while, and the fan will provide a decent cooling of the tool. However, when the MIG welder overheats, the red light will flash telling you to stop welding and make a pause. By the way, you can pick either of 4 available amperage settings and adjust the wire feeding speed for reliable and straight welds. We were pleased by the package that includes a face shield, a clipping hammer, a brush and a spool of welding wire, so you can start welding right after unpacking the unit. So, this Dirty Pro Tools welder is one of the most affordable models for people seeking a mid-power machine to weld fine metal sheets.

United Kingdom market choice: The Ironman is a high-powered welder that is very different from the other welders on this list! Boasting more power, the best duty cycle, and a weight that dwarfs the others, the Ironman is nearly without compare. Obviously, this is not the machine that a budding welder should vie for. It’s super heavy duty and will set the consumer back $2000. It welds from 24 gauge to an amazing ½ inch thickness for steel. The Ironman can handle steel, stainless steel, and aluminum. It is capable of Flux core. The “fan-on-demand” cooling system works as needed, offering up a reduced use of power. There are twelve voltage power settings. The Ironman has infinite adjustment for wire speed.

We take pride in offering a diverse selection of fume extractors, dust extraction systems, and bespoke extraction solutions to meet the varying needs of different industries and applications. From compact portable units to large-scale industrial systems, our products are designed and manufactured to the highest standards of quality and reliability. At LEV Supply, we understand that the proper installation of extraction systems is crucial to their effectiveness. That’s why our team of experienced technicians is dedicated to providing professional installation services, ensuring that each system is installed correctly and efficiently.

Mobile welding fume extraction systems are designed to be wheeled around facilities as needed to sources of pollution without a fixed location. Mobile fume extraction units can come in light, medium, or heavy-duty variants. Medium and heavy-duty mobile systems are available with disposable filters or self-cleaning filters. The MFD/MFS are mobile fume extractors, designed to remove dry welding fumes near the source. These mobile units contain a mechanical DuraFilter system and come standard with the UltraFlex extraction arm. The MFD and MFS come standard equipped with a filter indicator which shows whether the filter needs to be replaced.