Best rated downlight supplier: Choosing magnetic driver: There are two solutions for the whole system for driver choices. 48V Built-in driver. It is good for integration with all magnet tracks, especially for suspension or surface-mounted tracks. Available 100W 200W in power. External driver. Mainly working for recessed installation. The external driver is much better than a built-in driver in quality. Meanwell power supply 100W 200W 350W is available. The external power supply is suitable for placing the air outlet of the air conditioner or the exclusive maintenance port, which is convenient for future maintenance, repair, or replacement. The external driver must be working with the input adapter together. But for the integrated driver, you not need to buy an input adapter. See even more info on magnetic track system.
How to choose LED landscape lighting? Before buying LED outdoor landscape lighting, there are some essential things to take into consideration. The first thing to consider is how much light you need? You can choose from spotlights, floodlights, or wall packs. There are different wattages available depending on the size of your place. Another thing to consider is the kind of light that you need. As there are three types of lighting fixtures, you can choose from fully shielded, partially shielded, and non-shielded lighting fixtures. Before buying LED landscape lighting, you also need to consider the lumens per watt rating. This reading will tell you how much light is being put out by a fixture. A lower number means that the fixture emits more lumens, while a higher number indicates fewer lumens emitted from that fixture.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
High lumens. most of them are about 100lm/W output. Even it can be up to 150lm/W output for best outdoor flood lights in markets, saving much more 80% energy than traditional halogen flood lights or HPS floodlights. Longer lifespan. The service life of LED reflector light is at least twice as long as that of a traditional projection lamp, which can reach 50000hrs. The outdoor led projection light produced in 2013 is still in normal operation, and its service life has exceeded 7 years. Longest Lifespan: Most of the led lights we produced in 2013 until now are still working well. A long lifespan will save you much more cost for replacements.
The magnetic track light is the latest lighting solution, there is a magnet on the track head of the lamp body, which can be adsorbed on the aluminum magnetic attraction rail track with an iron sheet, and can be removed, installed, and moved freely without tools. Generally, the whole system is consists of the magnetic track, magnetic led light luminaries, and accessories. It is available to do DIY track lighting system by above magnet lamps.
Modular led flood lights: This kind of scheme adopts modular design. The power of each module is planned to be 50W 100W or 200W, and then each module is spliced. This not only improves the heat dissipation performance of the lamp, but also makes maintenance easier. At the same time, the illumination angle of some modules can be adjusted, and each module can be illuminated in different directions. It is mostly used in outdoor stadiums such as football fields, basketball courts, tennis courts, tunnels, high pole lights, construction sites, etc.
Maintenance: Solar street lights require regular maintenance to ensure they are functioning properly. This includes cleaning the panels, replacing batteries, and checking the wiring. Weather Dependent: Solar street lights are dependent on the weather, and may not be able to provide enough light during cloudy or rainy days. Vandalism: Solar street lights are vulnerable to vandalism, as they are often located in remote areas. How long does it take for a solar street light to charge? The amount of time it takes for a solar street light to charge depends on the size of the battery, the amount of sunlight available, and the type of solar panel used. Generally, it takes between 6 and 12 hours for a solar street light to charge fully.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
Hybrid Solar Street Lights: Hybrid solar street lights are a combination of standalone and grid-connected solar street lights. They are powered by a solar panel and battery combination and are typically used in areas where grid power is available but unreliable. All-in-one street lights: It is also called integrated solar street lights, there are including a street light head, solar panel, solar controller, and Li-batter into a light fixture. It is easiest to do the installation.
Second, the Led driver problem. The main reason is that the electrolytic capacity inside the power supply is insufficient, and the output current and voltage of the lighting system cannot be controlled stably, which makes the LED flood light flashes that turn on and off. Fourth, the floodlight is flooded. Floodlights are often used outdoors, if the waterproof strength is not enough, water ingress is likely to occur. Once water enters, it may cause the LED lamp beads to rust and break. As a result, flickering occurs. Read even more information at https://grnled.com/.
OEM ODM Service, we can do production or design according to customer’s requirements with much more experience than expected. We always keep the innovation in function and technology for all led lights, producing the best-led products which are popular in markets. And also provide relative technical support, for example, the IES Files to do Dialux simulation or technical training, etc. We will do all legal things for our customers.