During the summer it is advisable to set the temperature control at the thermostat or at the refrigerators with electronic display at 6-7 degrees in the refrigerator and -18 degrees in the freezer, at a minimum of 1-2 steps, to protect the compressor by giving it easy to reach temperatures. . The warmer the room the refrigerator is in, the lower the temperature must be set.

The refrigerant condenser should be cleaned every six months and this is not a very complicated operation, but you must take into account some rules. First, remove the refrigerator from the socket. There is a risk of electric shock when working with live parts. Identify where the capacitor is. For most refrigerator models, it is installed on the rear wall, but in some cases it may be under the refrigerator. If you are not sure, look for the necessary information in the User Manual. Use a soft brush to remove dust and other deposits from the condenser. Do not use chemicals. For hard to reach places, use a vacuum cleaner to which you mounted the end with a brush. Clean the floor with a vacuum cleaner and a damp cloth. Reconnect the refrigerator to the electricity source. Looking for San Clemente refrigerator repair services ? You can visit DNVappliance website!

Tip of the day: We’ve consulted more than a dozen refrigerator experts, read thousands of user reviews, and dug into sales and data trends to understand what kinds of fridges people are buying. You can read more about our research process in our accompanying guide to the best refrigerators. That guide, along with this one, was cowritten by staff editor Liam McCabe, who has covered the appliance industry for six years, including a stint at Reviewed.com, and has written about fridges, ranges, air conditioners, and other major appliances for Wirecutter. Staff writer Michelle Ma is a former retail reporter who has interviewed dozens of manufacturers about how their products are made, sold, and used.

Possibly the most versatile (and most expensive) type of fridge, French door fridges are similar in width to side-by-side models, and have the entire bottom third devoted to freezer space, just like a bottom freezer model. As with side-by-side fridges, the fridge door is split into two, opening from the centre for the fridge section. Some French door fridges have a single door for the freezer section, but some split the freezer section the same way as the fridge section, making for a grand total of four doors on your fridge. The main advantage to this slightly elaborate door configuration is that opening one of the half doors lets less cold air out than if you’d swung open both. The other advantage is the fact that as with a side-by-side model, the split doors mean less clearance is required between the fridge and your bench/other kitchen installations.